Quality made to measure sliding
mirror wardrobe doors available at low prices. Here is information
and specification for some of the elements that go into making
a Made To Measure Sliding Mirror Wardrobe.
For prices, frame and glass options check out our pricelist.
The price list gives you the strpped down prices plus any
extras you may require. For the Mirror Wardrobe Door price
list click Here
Bottom roll framed Sliding Door System Specification
Sliding wardrobe doors shall be of steel or aluminium framed
door panels Be supported by adjustable bottom rollers that
travel in a steel or aluminium track and top guides/rollers
that travel within a top track.
The steel frame shall consist of stiles (vertical members)
and rails (horizontal members).
The stiles and rails shall be joined at each corner by unhanded
connectors that snap into position, these are positively fastened,
Bottom connectors shall have either ball bearing rollers or
solid acetyl plain bearing wheel both with an integral anti
jump housing. Top connectors have a solid plastic guide or
roller permanently attached to the connector housing, which
provides a snug fit with the top track. The plastic guide
will adjust to five different positions to ensure an optimum
fit. Vertical adjustment is 1/18"
(29mm) on the bottom and 1/14" (32mm) on the top.
The top track shall be one piece and of pre-finished steel
or Aluminium. The bottom track is also prefinished steel or
Aluminium and does not exceed 5/16"
(8mm) height from the floor this reduces any tripping
hazard.
Top track finishes shall match the stile and rail. Bottom
track matches all finishes with the exception of woodgrain
styles where a white bottom track is used.
The stile, rail, top track and bottom track have a baked
enamel paint finish (satin gold, bright gold, Chrome, Satin
Chrome, bright white, mat black, arctic silver, architectural
brown, or empire almond) or a laminate finish (Pearwood, brass,
mahogany, beech, cherry, white ash, pine or oak). The connectors
are plated to provide corrosion protection.
Panel thickness: Glass or MFC (3mm to 4mm)
Maximum single door size: (850mm x 2438mm)
Maximum single door weight: (38kgs)
All glass products are be used with safety backed mirror.
The backing conforms to BS standards.
BS6 206 Class B
MFC(Melamine faced chipboard)
or Woodgrain Effect Information
One of the main components in furniture
production is melamine faced chipboard. It's produced based
on chipboard faced with special laminate materials.
There are some ways of chipboard facing:
- Paper-tarred films facing.
- Paper-laminated plastic facing.
- Polymer film facing.
- Organic veneer sheet facing.
- Facing with paint, varnish, phenolformaldehyde resin etc.
The surface of melamine faced chipboard may be smooth or
imitate the relief of wood grain or pearl. There is a variety
of colors and textures. Melamine faced chipboard is extremely
resistant to high temperature and household chemical goods.
It is used as a decorative product for furniture and interior
applications.
MFC products rely on a resin impregnated decorative paper,
either plain coloured or printed, to achieve the required
colour or pattern.
Melamine Faced products have the decorative papers directly
pressed to the surfaces of a core material. Most commonly
the core is either chipboard, resulting in the product known
as MFC, or MDF, resulting in the product known as MFMDF.
Mirror Door Lacquer cleaning guide
- To clean lacquer wall units and wardrobes, use only a
damp cloth on lacquer doors and sides
- Do not use any furniture polish or cleaners with ammonia
base. Mica cleaner may be used on side panels and shelves
only. Cleaning of mirror backs and mirror doors is also
very important.
- Cleaning solution should be mild, and should not contain
ammonia, vinegar, bleach, or solvents.
- Cleaning solutions should be sprayed on a clean cloth.
Do not spray directly on mirror. Spraying directly on mirror
can allow the cleaning solution to run down or behind the
mirror and cause discoloration.
|
